Bishop Archery's Link
Our team of Patriots talked it over and are now offering the Patent Pending Bridgeport Ultra-High-End 41L40 Tool Steel 100-315 Grain Broadheads at a blowout $79.99 three pack price-point for a limited time only.
Our American Made 315 grain Bridgeport is superior in our opinion and offered at a more economical price-point than the importers from overseas 315 grain head. In fact, our 315 grain three pack at $79.99 is only a couple of dollars more than what it costs us in operational costs and is the lowest priced 315 grain broadhead in the world! It is not made overseas. It is made in America with pride and at a lower price-point.
With these new prices we now need to sell around $15,000 worth of broadheads annually just to recoup our sponsorship of Bowsite. Please think of us if you have any double bevel or single bevel needs. We look forward to working hard to serve all of the needs of our clients who demand only the toughest and the best!
We will put our patent pending single bevel spin rates up against any other broadhead on earth.
We now sell single test heads starting at $34.99 for people to test out. If you shoot right helical or right offset then give them a spin, before committing to a whole $79.99 three pack.
Bishop Archery: 760 - 876 - 0120 [email protected] www.bishoparchery.com
Good luck and keep it rolling.
Bishop Archery's Link
760 - 876 - 0120 [email protected] www.bishoparchery.com
Bishop Archery's Link
We would like the Drills sharper from the factory, but they are sharper from the factory than many other manufacturer's heads. The 40 degree edge bevel Dicing Drills will retain their sharpness out of the package all the way through the animal unlike most disposable/replaceable blade heads without ultra thick stainless steel blades. The Patent Pending Dicing Drills should be handled with care out of the package. The Dicing Drills can be taken to shaving sharp in seconds on our paper wheels, or in minutes with the DMT Diafold sharpener at www.bishoparchery.com WE DO NOT LIKE PEOPLE SHARPENING OUR TANTO TIPS ON OUR DRILLS. We would rather they do not do that but will support our clients no matter what they end up doing. We put a lot of time into the Patent Pending design of the drills and we don't like people sharpening the tanto tip, no matter how much human nature tempts them to as it helps the heads to have more structural integrity and to spin cut more in it's stock configuration.
The Patent Pending Scientific Methods are sharpened from the factory through a different process than the concave Dicing Drills. The Scientific Methods come shaving sharp out of the package and in both Bridgeport and Bishop models will retain their edge through to offside ribs of animals as will the Drills. The Scientific Methods can easily be sharpened with the Independence Industries Paper Wheels or DMT Sharpeners at www.bishoparchery.com
The Drills, Methods and Vantage Point Archery Penetrator Double-Bevels that we carry can all be field sharpened in about the time it takes to replace many types of disposable blade broadheads with the DMT Diafold. There are some sharpening videos on YouTube that we have of the Patent Pending Dicing Drills and the Scientific Methods. One should be attached here as well.
[email protected] 760 - 876 - 0120 www.bishoparchery.com
Blow out sale meaning discontinued? or do they come in both bevel sides?
Bishop Archery's Link
Our left single bevel prototypes unscrewed and put an enormous amount of torque on the broadhead to insert connection where heads would loosen. We cannot offer a single left bevel in a screw on. We would love to offer a glue on in both left and right, but yet again we could not get the prototypes to stay adhered in left or right bevel in a glue on due to the way our heads spin. We would really like to put out a glue on for trad shooters, but couldn't come close to being able to do that with any of our prototypes, other than the early 20 and 25 degree edge bevel heads from a few years ago. We have since learned how to make them spin more and the downside is that the above left bevel screw in and left and right bevel glue on versions can not be sold to people in good faith. After months of blood, sweet and tears to put out a glue on it was total failure with our patent pending broadhead designs.
The only single bevel we will ever make in our patent pending designs then is a right bevel screw in.
We would like to put out some limited edition proprietary Bishop S7 Tool Steel Vantage Point Archery Jeff Miller designed two blade double bevels and three blade double bevels in glue on and screw in from 315-630 grains just for the heck of it someday. We figure it would be nice to have something like that available to people and we are not the double bevel experts. We would contract VPA's Miller who is the leader in all double bevels on earth to come up with the double bevel designs. We also sell the VPA's at minimum VPA advertised prices at www.bishoparchery.com
As far as single bevels though all we can get to work in our patent pending designs is right bevel screw in heads, due to the way that they spin on impact and through any form of medium as noted above.
Bishop Archery's Link
