Loose sight screws
Contributors to this thread:Equipment
From: BOX CALL
13-Apr-17
Sight screws on my PSE keep looseining up.will lock tite keep them tight and how much to use,thanks,dan
From: Zebrakiller
13-Apr-17
I use bow wax ,
From: KJC
13-Apr-17
If you use locktite, use the blue not the red.
From: Buck Watcher
13-Apr-17
Beeswax on all of my threads from sights to broadheads.
From: WapitiBob
13-Apr-17
I'd work on the bow as well, too much vibration that shouldn't be there. A cpl ounces of weight on the riser might fix it. You'll have to play with the location.
From: wyobullshooter
13-Apr-17
Screws can certainly loosen over time, but I agree if it's happening often, see if you can find the problem. May not be in your case, but the #1 cause of excessive vibration is light arrows.
I put a small dab of locktite on all my screws...sight, rest, cam modules. Like KJC suggests, use blue, NOT red!
From: BOX CALL
13-Apr-17
Say what ya want,but I put a spiral looking rubber stabilizer and a bow jax x shaped dampener on the cable guard rod,on the PSE and big difference.lot quieter and way less vibration.and added bees wax on the sight screws.I'm shooting 2216 arrows now,mite go to 2217 jda arrows .