Bowsite.com

Small broad head adapters

I have some three blade broad heads that I want to fix up ,but they have a small ferrule.5/16" adapter won't fit.is there a 9/32" glue in adapter made.,thanks,dan

5/16 will work. They all have a 5 deg taper. It just has a bit of a shoulder showing. If it really bothers you the shoulder could be ground down to same as shaft/ferrule. You don't say what the heads are.....but, if they happen to be the older, original Hi Precision those had a 7 deg ferrule.

The heads have a H stamped in them and six little holes all around the ferrule.there black

Yep....7 deg. Ben Pearson also did some 7 deg early on before 5 deg was standarized. There is not a 7 deg adapter.

Register here to reply to this topic