Eccentric wheel change
Contributors to this thread:Equipment
From: BOX CALL
21-Jan-18
Got this PSE elite series compound.I'm barely getting my 31" draw,and I've got a set of long draw wheels .can the wheels just be changed out and reconnect all the cables then adjust draw length.bow will just be for target.thanks,dan
From: BOWUNTR
21-Jan-18
Oh my.... you probably want to consult with a paleontologist on this one... good luck. I'd also check that 31" draw length of yours... Ed F
From: BOX CALL
21-Jan-18
Yep I draw 31". Bow is like new,but old.laminated limbs.
From: WapitiBob
21-Jan-18
I believe the cable lengths are different. Check the wheels and cables to see if those have the swedge on the cable that drops into the pocket on the wheel or if the cable is routed thru the wheel and held with a set screw.
From: BOX CALL
21-Jan-18
Just answered my own question.pulled a wheel off and the wheel and cable are a set.no way to get the cable out of the wheel.a set screw holds the cable in place.can go with a little longer string with no overlap.
From: hawkeye in PA
21-Jan-18
Dan, you have a pm