Easton Arrow Sises
Contributors to this thread:Equipment
From: MeanMachine
25-Feb-18
Has the Easton company changed their sizing for their arrows? I have shot the Easton Hexx shaft for a few years and now and wanted to order a dozen new shafts. I notice the sizing has sizes like 6mm & 5mm. So I measured the diameter of my shafts and they are 7.1mm. Is the new shafts and sizes different from the old ones. The GPI and the spine on the new shafts seem the same as the ones I have. Any input on this would be greatly appreciated.
From: Trial153
25-Feb-18
The hexx has not changed.
From: Buffalo1
25-Feb-18
The 6mm is the Axis and FMJ size shafts
The 5mm is the new micro sized shafts
Can't make a comment on the "Hexx" size. No knowledge.
The new titles can get confusing when trying to relate to the former model shafts.
From: raghorn
26-Feb-18
What does Easton have to say when you call them??
From: MeanMachine
28-Feb-18
I spoke with Easton customer service today. Shafts are referenced by the inside diameter now. Like those of you mentioned above its still the same shaft. So that 6mm shaft is the same as that measured 7.1 O.D. shaft. Thanks for all your assistance.
From: MeanMachine
28-Feb-18
Also found this.
https://eastonhunting.com/simplifying-arrow-diameters-for-bowhunting-2/
