Mathews Inc.
Pin size and color
Equipment
Contributors to this thread:
Lefty 19-Aug-18
Buck Watcher 19-Aug-18
Ambush 19-Aug-18
Shawn 19-Aug-18
Buffalo1 19-Aug-18
Lefty 19-Aug-18
Gator 19-Aug-18
Lefty 19-Aug-18
Kurt 19-Aug-18
Matt 19-Aug-18
Mark Watkins 20-Aug-18
x-man 20-Aug-18
Kurt 20-Aug-18
Lee 20-Aug-18
Prairie Dog 21-Aug-18
Medicinemann 21-Aug-18
Ironbow-cell 22-Aug-18
From: Lefty
19-Aug-18
Thinking of switching to the .10 pins from the .19. The .19 pins just seem to block out too much of the target. Was thinking top 2 green middle yellow bottom 2 green. Never used yellow but think it would be better than red. Just seeing what everyone else runs.

From: Buck Watcher
19-Aug-18
I use 3 green pin .026/.019/.019. I have a hard time seeing a .010. I can see the green the best, yellow is just ok and red is poor. Especially in a blind.

From: Ambush
19-Aug-18
I use green, yellow, green, all .019" on a Tommy Hogg slider. Thinking of trying a .010" for the bottom pin. I also use a verifier for these senior's eye's.

From: Shawn
19-Aug-18
I use the .010 on a single pin in green. I would never have two pins the same color consecutive in order on a multi-pin sight. Easy to choose the wrong one when having to take a quick shot. Shawn

From: Buffalo1
19-Aug-18
Can you see a .010 pin with the sun is in or slightly in your face?

From: Lefty
19-Aug-18
I'm using the IQ sight and after looking at it again it seems the material surrounding the pin seems a bit much, which I'm guess is blocking out some of the target. Everything at 30 yds .19 seems to big. It is fine on deer but when shooting spots I'm just covering the area

From: Gator
19-Aug-18
Just put an three pin slider on with three pins all green .019 Did not like how the third pin covered so much so I changed it for .010 Much better 40 and beyond, imho.

From: Lefty
19-Aug-18
Wish I could use a slider but I am a hand amp, so I hold the bow with my left hand and draw with my prosthetic. Don't think I could move that slider with my foot if I needed to. ??

From: Kurt
19-Aug-18
As a retiree, I need 0.019" pins to see them decently. Changed out a couple of 0.010" green pins on the bottom of my 5-pin Black Gold Verdict slider for the bigger ones....they are available for sale if you want to try a 0.010" pin fits most any Black Gold sight, or at least the 3 generations of them I have.

From: Matt
19-Aug-18
All green .019.

From: Mark Watkins
20-Aug-18
#1 pin is .29 #1-#4 are .19 #5-#7 are .10

All green SpotHogg.

Mark

From: x-man
20-Aug-18
FWIW, my eyes see the yellow just a well as the green. Maybe better.

From: Kurt
20-Aug-18
I like green or yellow but not red. I can see red but have eyeglass induced prism effect making the red pins appear to be left of the green and yellow pins when shooting and viewing the sight at 30* from perpendicular (straight-on).

From: Lee
20-Aug-18
20 and 30 are .029, next 3 are .019. Green/yellow/green alternating

21-Aug-18
I use all .019 20 40 and 60 are green 30 and fifty are red. easy to make sure i'm on the right pin.

From: Medicinemann
21-Aug-18
I alternate green and yellow 0.19 pins from 20 to 60, and I use a verifier. Bottom pin is also on a Dial, so the distance is variable.

From: Ironbow-cell
22-Aug-18
When your colorblind like me, they all look the same. Just a bright pin. I like .019.

  • Sitka Gear