Mathews Inc.
Bowtech SR6 question
Equipment
Contributors to this thread:
spinedoc 20-Jul-19
ohiohunter 20-Jul-19
spinedoc 20-Jul-19
sdkhunter 20-Jul-19
ELKMAN 21-Jul-19
carcus 21-Jul-19
From: spinedoc
20-Jul-19
I just received my new SR6. It is in the comfort position, and there is nothing that came with the bow explaining how to switch to performance setting. Can anyone tell me how it is done. Thank you.

From: ohiohunter
20-Jul-19
Google is your friend and should be your first resource. Dr? As in D.O.C?

https://bowtecharchery.com/video-room/basics-of-archery-stance-release-and-follow-through/

From: spinedoc
20-Jul-19
Thank you. I will look that up. I appreciate it.

From: sdkhunter
20-Jul-19
There is a little mod on each cam that you loosen 2 screws and can rotate if changing draw length... you end up removing both of those screws completely and then flipping the disc over... the mod says “comfort” or “performance” - just have the wording displayed for what setting you want... be aware that depending on the current draw length and position of the mod screws - you may need to press to change (sometimes you don’t need to but other times a press is needed). Also make sure to put the mod in the correct position (matching the draw stop)

From: ELKMAN
21-Jul-19
Just flip the discs over on the mods and your done.

From: carcus
21-Jul-19
I started in performance shot it for a month then put it in comfort, depending on what weight your shooting and what your using it for, it almost feels 10 pound heavier in performance, not sure how much speed is gained, but my pin gap grew in comfort. Easy flip of the mod to change it, might need a press depending on draw length

  • Sitka Gear