Contributors to this thread:
? For whisker biscuit shooters?
From the best rest thread I was surprised by the overwhelming amount of guys shooting the biscuit rest. So I have decided to take another look at them. My biggest question is how often do they tear up blazer vanes with a pretty good offset? I usually never have to re-fletch my arrows unless I shoot one off while practicing. I guess bottom line for me is do you have to re-fletch arrow due to the biscuit eating them up?
My wife, my son, and my father all shoot Blazer vanes and whisker biscuits...and I used to as well. I've always fletched them with the Arizone EZ Fletch with max right helical. I've never had to refletch one of their arrows, due to being shot through the biscuit...the Bohning Blazers are such a strong, durable material, they simply don't lose their shape. If anything, I've noticed slight wear on the biscuit from shooting extreme helical...but nothing on the vanes. My only gripe about shooting a biscuit, is that it will smear your arrow wraps a little, but that's pretty much a non-issue. Bohning now makes a Heat vane, which is a little longer and has a shorter profile....I've started using these with only a slight right helical, and the results have been outstanding! Don't hesitate to shoot the whisker biscuit...easy to setup & tune, rock solid rest, and FULL arrow containment that is ideal in most any hunting situation. Good luck to you!
I shoot 4 fletch Blazer with offset through a biscuit, never have to reflech because of biscuit wear.
I have Blazers with a helical and have shot hundreds of shots with the arrows and haven't had any issues with the vanes getting damaged.
Should not be an issue. Great, simple rest
I have shot the rest for approx 15 years and a number of types of fletching including blazers and max hunters. Not a single issue with 4", 5" vanes, blazers, or AAE Max Hunters. I'd say you're good to go.
My Wife has been shooting blazers through a Biscuit for 3 Years, never seen a bit of damage to fletching.
I shoot flex fletch (4 vanes offset). If anything, after a thousand shots or so, I have to replace the Biscuit insert, but the fletching is just fine.
I concur, no damage here. Zero, zip, nada
That's good news, I'm getting ready to set up a backup bow and I might just have to give the biscuit another try. I love a simple, no hassle killing machine.
Not to mention it`s whisper quiet....I still can`t get used to that mechanical "slap" of a drop away. It may be minor but it still drives me nuts.
Zero issues with my W-B in 10 or 15 years. I shoot a lot and just for the hell of it change the Biscuit every 2 years.. Going to a club that has a 3D shoot tonight. 6 to 8pm,, then food and refreshments 8 to 930.. My goal at these shoots is to hit 28 out of 30 in the kill zone. The ones I don't hit in the kill zone is not the fault of the rest. Ed
Ive used a Biscuit Pro for years on the back up bow, and finished the season last year with another 'Pro' I purchased for the main bow after the f'n drop away wouldnt function in the cold (Rip Cord Ace) .... I use 2" Blazers fletched full helical with a AZ Mini-MAx jig ... cap off the front and rear of the vanes with a drop of glue.. there may be some rub marks on the vanes after dozens of shots, but it dosnt effect flight... I still get the same accuracy with FP's/BH's as I do with my drop away (Rip Cord Max-Micro).... this is the last chance this season with a drop away, if this one screws up, I'm done for good with 'em... The Max-Micro is "suppose" to be freeze proof and they say the very cold wont effect it .... I'll see ..... in the wet/snow/ cold I lightly spray the bristles of the biscuit with silicone ..... never had one freeze up
No issues on my bows either.
I too have been looking at possibly changing from a drop-away to a biscuit. I have been shooting 4-fletch for many years. I like the control the offer for BH's. My question, will a biscuit shoot 4-fletch or would I need to redo arrows for a 3-fletch?
I've shot thousands of arrows through mine and never had to refletch because of it.
"My question, will a biscuit shoot 4-fletch or would I need to redo arrows for a 3-fletch"?
Been shooting 4 fletch for Years with a biscuit. Just make sure your arrows are configured, so the fletches with the widest span between them, are split outside of the "black" zone on the bottom of the biscuit.
Using a biscuit since they can out.The "Bumble Bee" of rests....it just works
Never had an issue with vane damage. Very simple effective hunting rest.
Three fetch and four fletch. No problem. Not sure why everyone doesn’t shoot them in hunting situations....
I’m guessing I usually get 5000 shots through mine before replacing because of bristle breakage... though with 5% bristle breakage I probably could should another 5000
just orientate the vanes as an X for 4 fletch ....the lower black bristles are stiffer for arrow support
I posted on the other thread...I use and like VaneTec X 3" vanes and a whisker biscuit waved the vanes pretty bad without heavy shooting. I really like the VaneTec's and finally switched to a QAD HDX to keep using them, but now that I've shot the HDX awhile, next year I'll probably go back to a WB and start using Blazer vanes based on what everyone here is saying.
I shot a biscuit for a few years but it was not for me. Simple yes and effective yes. But I don’t have perfect form and I noticed some issue with broadhead flight. Went to an hdx and those issues went away.
I've had to replace the biscuit portion of the rest but never my fletchings.