Easton Aluminum Arrow ShaftsContributors to this thread:
fubar racin 14-Feb-20
Just acquired a few Easton Aluminum XX75 Gamegetter black shafts, marked 500... I get they are probably 500 spine deflection, but curious what diameter are they, 2117s, 2018s?
Oops, I think I found my answer on 3Rivers site, I think they're 2016s.... Thanks...
Yes, 2117s are 400 spine, 2315s are 340 spine and 2317s are 300 spine in the Gamegetter line.
Easton Gamegetter XX75 Aluminum Shaft Sizes:
500/2016 400/2117 340/2315 300/2317
Sounds right, I shoot the 400s (2117s).
Don't know why they don't just label them "2117"...
From: fubar racin
What would be the aluminum numbers for a 250 spine arrow?
fubar, according to their charts there isn't one. But you could probably cut a 2317 shorter than 28" to get there if that would work for you.
Find some old 24-19s....probably in that ballpark. An old Easton spine chart rates them up to 119# bow at up to 29-1/2" draw length! For comparison a 23-17 was rated to an 89# bow at the same 29-1/2" draw.