Moultrie Products
Easton Aluminum Arrow Shafts
Equipment
Contributors to this thread:
Zbone 10-Feb-20
Zbone 10-Feb-20
12yards 13-Feb-20
Zbone 13-Feb-20
elkmtngear 13-Feb-20
fubar racin 14-Feb-20
12yards 14-Feb-20
Kurt 14-Feb-20
From: Zbone
10-Feb-20
Just acquired a few Easton Aluminum XX75 Gamegetter black shafts, marked 500... I get they are probably 500 spine deflection, but curious what diameter are they, 2117s, 2018s?

From: Zbone
10-Feb-20
Oops, I think I found my answer on 3Rivers site, I think they're 2016s.... Thanks...

From: 12yards
13-Feb-20
Yes, 2117s are 400 spine, 2315s are 340 spine and 2317s are 300 spine in the Gamegetter line.

From: Zbone
13-Feb-20
Yep...

Easton Gamegetter XX75 Aluminum Shaft Sizes:

500/2016 400/2117 340/2315 300/2317

From: elkmtngear
13-Feb-20
Sounds right, I shoot the 400s (2117s).

Don't know why they don't just label them "2117"...

From: fubar racin
14-Feb-20
What would be the aluminum numbers for a 250 spine arrow?

From: 12yards
14-Feb-20
fubar, according to their charts there isn't one. But you could probably cut a 2317 shorter than 28" to get there if that would work for you.

From: Kurt
14-Feb-20
Find some old 24-19s....probably in that ballpark. An old Easton spine chart rates them up to 119# bow at up to 29-1/2" draw length! For comparison a 23-17 was rated to an 89# bow at the same 29-1/2" draw.

  • Sitka Gear