Sitka Mountain Gear
Best 150 grain broadheads?
Equipment
Contributors to this thread:
Korey Wolfe 24-Aug-20
Treeline 24-Aug-20
Ermine 24-Aug-20
Tlhbow 24-Aug-20
Mnhunter1980 24-Aug-20
PushCoArcher 24-Aug-20
tradi-doerr 24-Aug-20
GLP 24-Aug-20
Buglmin 24-Aug-20
M.Pauls 24-Aug-20
WVFarrier 24-Aug-20
fubar racin 24-Aug-20
M.Pauls 24-Aug-20
Treeline 24-Aug-20
Slowshooter 24-Aug-20
GhostBird 25-Aug-20
carcus 25-Aug-20
APauls 25-Aug-20
WV Mountaineer 25-Aug-20
LBshooter 25-Aug-20
Korey Wolfe 25-Aug-20
Roper 25-Aug-20
WV Mountaineer 25-Aug-20
12yards 25-Aug-20
12yards 25-Aug-20
PECO 25-Aug-20
Huntography 25-Aug-20
From: Korey Wolfe
24-Aug-20
I'm considering increasing my FOC, but I don't see a lot of options in the 150 grain range.

If you shoot a 150 grain broadhead, what is it and are you happy with it?

From: Treeline
24-Aug-20
You’re looking in the wrong place.

Traditional guys have a ton of options.

150’s are lightweights and lots of options.

VPA makes great 3- or 2-blade options.

From: Ermine
24-Aug-20
Other option is to increase insert/component weight and keep your current point weight

Iron Will makes some Nice 150 grain heads

From: Tlhbow
24-Aug-20
I shoot the 150 grain magnus stinger , two blade and four blade . Same blade as the 125's but thicker Ferrell . Work really well for me. 50/60 yards is about as far as I shoot them practice they don't wonder around.

From: Mnhunter1980
24-Aug-20
Vpa and magnus both make them. Both great heads. If you want to stick with your broadheads you can buy insert weights and a tool to install them pretty cheap. You can add and subtract weights as desired. Gold tip is the brand I have, pretty slick

From: PushCoArcher
24-Aug-20
Slick trick makes a 150gr 4 blade.

From: tradi-doerr
24-Aug-20
Cutthroat broadheads by RMSG, I shoot the 150gr, get great flight and with the single bevel great penetration and massive tissue damage from the way it cork screws when passing thru the animal.

From: GLP
24-Aug-20
Grim reaper pro hades comes in 150gr

From: Buglmin
24-Aug-20
I just increase insert weight and use any 125 grain head I want. I'd rather strengthen the insert end up instead of just screwing on a heavier head.

From: M.Pauls
24-Aug-20
I really like Magnus stingers and lately for whitetails I’ve actually like D.R.T. 150/175s for whitetails. I like the wide cut with stinger blades. I’ve had some pretty excessive blood trails with those in the last couple years

From: WVFarrier
24-Aug-20
You can always keep your favorite broadhead and just put in a heavier insert

From: fubar racin
24-Aug-20
Wife stuck a 150 via 3 blade through a cow elk last year like a hot knife through butter

From: M.Pauls
24-Aug-20

M.Pauls's embedded Photo
M.Pauls's embedded Photo
Magnus Stinger on top, DRT made by “dirt nap gear” on the bottom, shown with 25gr collar that brings it from 150 to 175 if needed. Don’t care for the brand name but I like the head

From: Treeline
24-Aug-20
Look at the Palmer 4-blade, too. A little heavier at 160 grains but cut a hell of a big hole.

24-Aug-20

Bill V - Iron Will 's embedded Photo
Bill V - Iron Will 's embedded Photo
Our Iron Will s150 broadhead is starting to sell more and more as guys want to add weight upfront. We also make 25 grain Impact Collars that you can add to many arrows if you want to stay with a 125 grain head and have more options.

From: Slowshooter
24-Aug-20
I tried shooting a vpa 3 blade in a 175. It was tough to get to fly out of my bow. Decided to go heavier yet and now I'm shooting a 300 grain werewolf single bevel. They make 150s too but I think they are vented..

From: GhostBird
25-Aug-20
I shoot the VPA 150 grain unvented head and like it a lot. Flies good and resharpens easily.

From: carcus
25-Aug-20
Id rather use heavier inserts to achieve higher foc, way more broadhead options in 100gr and 125. Although I have never had a issue on big animals with a standard fmj/insert/100gr head. My opinion is don't go too heavy, if you do it will put less racks on the wall, been there done that!

From: APauls
25-Aug-20
I love the Iron Will 150 solids.

25-Aug-20
Building the best arrow starts with the Broadhead. Period. With the power of modern compounds, it does no good to increase weight forward percentage with a Broadhead that’s gonna buckle under impact.

Pick your head, collar the shaft, then shoot something with confidence that it’s going to keep plowing because the head doesn’t bust or break upon impact. Chisel tipped heads or a thick single bevel are the best of the best. Everything is else for components is simply what you have availability too.

From: LBshooter
25-Aug-20
Hard to beat a wensel woodsman / VPA, I shoot them and they kill , fast and fly like guided missiles.

From: Korey Wolfe
25-Aug-20
Thanks for the suggestions. I have looked into most of them.

I wanted to stay away from the weighted collars because of the difference in size which might cause a small amount of reduction in penetration. Any truth in this? Enough to make a difference?

Leaning towards the Magnus; my wife and kids have had good success with them.

From: Roper
25-Aug-20
I like both the 150 VPA and the 150 Magnus Stinger. I have quite a few of both. They both do the job well ! The Magnus warranty is 100%

25-Aug-20
It’s not foam. The difference in collared and noncollard shafts in penetration on animals is zero.

From: 12yards
25-Aug-20
Quite a few good ones nowdays. I use Magnus Stinger 4 blades out of one bow. Amazed at how well they fly.

From: 12yards
25-Aug-20
Quite a few good ones nowdays. I use Magnus Stinger 4 blades out of one bow. Amazed at how well they fly.

From: PECO
25-Aug-20
VPA

From: Huntography
25-Aug-20
The 150 gr 3 inch Swhacker has worked great for me - elk and whitetails.

  • Sitka Gear