HHA king pin 3 pin
Contributors to this thread:Equipment
From: So467
20-Sep-20
Please help! As title says. How would you sight this in without the set up wheel. I have one set up tape left and don’t want to mess this up. I tried following the instruction but do not feel this will work for a three pin.
From: Sam
20-Sep-20
Youtube has been a great asset to me for this sort of thing.
From: So467
20-Sep-20
Sam I looked there first but no one tells you where to put the set up tape as far as position on the wheel.
From: MoBowhunter
22-Sep-20
To get sight tape correct follow directions just like single pin with set up tape. After you have correct yardage tape sight in top pins for a 20 yd and 30 yd. Sight in 3rd pin for 40 and lock the wheel there. Then cut the correct sight tape at the 40 and place the 40 on the tape right at the needle. anything past 40 you dial the wheel to the yardage desired and use the 3rd pin.
From: So467
25-Sep-20
Thanks new tapes arrive tomorrow
From: So467
27-Sep-20
Crazy how easy it was once I had the correct tapes.